射流粉碎機

LNJP系列射流粉碎分級機是我公司針對產品粒度較粗，有特定粒度段要求、成品率要求高的產品而開發的一種全新粉碎分級機(產品)，該機型主要具有成品率高、能耗低、粒度均勻穩定等優勢。廣泛用于玻璃微珠、金屬硅粉、石墨粉(電池負極材料)的生產。

◆采用我公司流能技術研究所開發的流體力學軟件，計算出*合適的流場，*理想的壓力分布來指導設計，噴流能的充分利用及粉碎強度控制技術，極大的提高了粉碎效率，降低了能耗，過粉碎小；

◆成品率高：該設備與目前市場上常規的磨粉機相比，成品率提高了8-15個百分點。

◆能耗低：裝機功率小、單位能耗低，比常規氣流磨低40%；

◆耐磨性好：二次風采用專門的設計，使二次進風全段面均勻流，保持清洗流場均勻穩定，大大的降低了磨損。

■應用領域

◆主要應用于有特定粒度段要求的產品，成品率要求高的物料

◆典型物料有：玻璃微珠、金屬硅、石墨等...

LNJP New Jet Mill and Classifier is a newly grinding classifier( patent product)for coarser particle, specific size requirement, and high yield material, with advantages of high output, lower energy consumption, particle size concentrating distribution, it is widely used glass beads, metallic silicon powder, graphite powder etc.

1.Fluid dynamics software is developed by our independent R&D, calculated the perfect flow and ideal pressure distribution, combined the advantages of fluid dynamics technology and crushing strength control technology, greatly improve grinding efficiency and reducing energy consumption.

2.High capacity:compare with other grinding machine,the output of this equipment has improved 8~15 percentage.

3.Low energy consumption: Low energy consumption power, saving 40% over the equipments

4.Wear-resistance, secondary air entry keeps the cleaning flow stability, greatly reduce the wear.

■Application

Apply in requirement for the specific granularity and high yield material.

Glass beads, metallic silicon, graphite etc...