制藥網>產品庫>儀器儀表>其它儀器儀表>其它儀器儀表>>德國SITEMA夾緊裝置

德國SITEMA夾緊裝置

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱尚階（上海）自動化設備有限公司
品牌其他品牌
型號
所在地上海
廠商性質經銷商
更新時間2018/4/5 20:23:16
訪問次數1057

產品標簽:

德國SITEMA夾緊裝置德國SITEMA夾緊裝置德國SITEMA夾緊裝置德國AVITEQ磁力振動器德國SITEMA夾緊裝置

在線詢價 收藏產品查看電話同類產品

聯系我們時請說明是制藥網 上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

尚階（上海）自動化設備有限公司是主要經營歐美進口元器件的公司主要暴扣，儀器儀表，泵，閥傳感器，工裝夾具，機廠零配件，汽車零配件等等

展開顯示更多內容

儀器儀表泵閥傳感器

產品簡介在線詢價

產地	進口	產品新舊	全新

德國SITEMA夾緊裝置安全制動器安全鎖定位器

德國SITEMA夾緊裝置產品信息

德國SITEMA夾緊裝置安全制動器安全鎖定位器

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Type	Ident.-No.	Rod Ø mm	Admiss. load kN	Release press. bar	Casing height mm	Casing Ø mm
KSP 16	KSP 016 01	16	2	3,5	114	96	Inquiry	CAD
KSP 22	KSP 022 01	22	5	3,5	137	120	Inquiry	CAD
KSP 22	KSP 022 02	22	10	3,5	137	120	Inquiry	CAD
KSP 25	KSP 025 01	25	15	3,5	142	140	Inquiry	CAD
KSP 28	KSP 028 02	28	20	3,5	173	184	Inquiry	CAD

Type	Ident.-No.	Rod Ø mm	Admiss. load kN	Release press. bar	Casing Ø mm	Casing height mm
KRG 18	KRG 018 01	18	7	100	68	122	Inquiry	CAD
KRG 22	KRG 022 01	22	10	100	74	130	Inquiry	CAD
KRG 28	KRG 028 01	28	20	100	102	170	Inquiry	CAD
KRG 36	KRG 036 01	36	50	100	120	204	Inquiry	CAD
KRG 45	KRG 045 01	45	75	100	125	230	Inquiry	CAD
KRG 56	KRG 056 01	56	100	100	155	238	Inquiry	CAD
KRG 70	KRG 070 01	70	150	100	170	272	Inquiry	CAD
KRG 90	KRG 090 01	90	250	100	210	306	Inquiry	CAD
KRG 110	KRG 110 01	110	400	100	265	385	Inquiry	CAD

SITEMA Safety Locks pneumatic / for compressive load For complete measurements see: S12 - Dimensions, pneumatic / compressive load
Type	Ident.-No.	Rod Ø mm	Admiss. load kN	Release press. bar	Casing Ø mm	Casing height mm
KRGP 16	KRGP 016 20	16	5	3,5	82	109	Inquiry	CAD
KRGP 22	KRGP 022 20	22	10	3,5	102	132	Inquiry	CAD
KRGP 28	KRGP 028 20	28	20	3,5	155	166	Inquiry	CAD

Locking Units

Locking units are capable of retaining forces in both axial directions. They are used in a wide variety of machines. In most versions the clamping is spring actuated, and hydraulic or pneumatic pressure is required to release it. Shaft diameters range from 10 to 250 mm. The respective holding forces vary from 0.1 to 1000 kN, depending on style and customer requirements.

If the device is used as a restraint device and emergency brake in machine tools, a special version KFHW is available. For this reason, all the external parts and sealing surfaces are made of stainless steel.

Applications

Test stand

Ratchless fixation of the crossrail >>

Machine for concrete bricks

Temporarily fixation of moving machine parts >>

Bending press

Securing the horizontal position during bending process>>

Turning Machine; Lathe

Fixation of the center sleeve of a lathe >>

Suspension Bridge

Fixation of the hydraulic cylinders >>

Linear Drive

Safety for the z-axis of a machine tool >>

Automotive: Assembly Line

Fixation of the body in x- and y- direction >>

Automation in refinery industry

Safe fixation of the locking of a transport container >>

Automatic Welding Machine

Ratchless fixation of the workpiece >>

Machining large escope Mirror

Fixation of the supporting cylinder for high-end machining>>

Steelworks

Hydraulic wedge adjustment of the lower roll >>

Machine tool

Holding up the vertical axis of a machine tool >>

Clamping via disc springs, hydraulic releasing

Different types are available to fit to the common cylinders.

KFH, round casing (hydraulic)

for round cylinders and applications which are independent from a cylinder

Customer-made coupling flange

SITEMA Locking Units type KFH Clamping via disc springs, hydraulic releasing For complete measurements see: F50 - Dimensions, type KFH
Type	Ident.-No	Rod Ø mm	Admiss. load kN	Release press bar	Casing Ø mm	Casing Length mm
KFH 18	KFH 018 50	18	10	70	70	122	Inquiry	CAD
KFH 18	KFH 018 51	18	5	40	70	122	Inquiry	CAD
KFH 25	KFH 025 50	25	20	100	95	140	Inquiry	CAD
KFH 25	KFH 025 51	25	12	50	95	140	Inquiry	CAD
KFH 28	KFH 028 50	28	40	100	115	178	Inquiry	CAD
KFH 28	KFH 028 51	28	20	50	115	178	Inquiry	CAD
KFH 32	KFH 032 50	32	40	100	115	178	Inquiry	CAD
KFH 32	KFH 032 51	32	20	50	115	178	Inquiry	CAD
KFH 36	KFH 036 50	36	50	100	138	200	Inquiry	CAD
KFH 36	KFH 036 51	36	35	55	138	200	Inquiry	CAD
KFH 40	KFH 040 50	40	50	100	138	200	Inquiry	CAD
KFH 40	KFH 040 51	40	35	55	138	200	Inquiry	CAD
KFH 45	KFH 045 50	45	75	100	155	213	Inquiry	CAD
KFH 45	KFH 045 51	45	45	75	155	213	Inquiry	CAD
KFH 50	KFH 050 50	50	75	100	155	213	Inquiry	CAD
KFH 50	KFH 050 51	50	45	75	155	213	Inquiry	CAD
KFH 56	KFH 056 50	56	100	100	180	228	Inquiry	CAD
KFH 56	KFH 056 51	56	70	70	180	228	Inquiry	CAD
KFH 60	KFH 060 50	60	100	100	180	228	Inquiry	CAD
KFH 60	KFH 060 51	60	70	70	180	228	Inquiry	CAD
KFH 70	KFH 070 50	70	150	100	225	302	Inquiry	CAD
KFH 70	KFH 070 51	70	80	60	225	302	Inquiry	CAD
KFH 80	KFH 080 50	80	150	100	225	302	Inquiry	CAD
KFH 80	KFH 080 51	80	80	60	225	302	Inquiry	CAD
KFH 90	KFH 090 50	90	250	130	260	360	Inquiry	CAD
KFH 90	KFH 090 51	90	190	100	260	360	Inquiry	CAD
KFH 100	KFH 100 50	100	250	130	260	360	Inquiry	CAD
KFH 100	KFH 100 51	100	190	100	260	360	Inquiry	CAD
KFH 125	KFH 125 50	125	330	100	350	405	Inquiry	CAD
KFH 140	KFH 140 50	140	600	100	430	514	Inquiry	CAD

KFHC, special version for machine tools (hydraulic)

SITEMA Locking Units type KFHC Clamping via disc springs, hydraulic releasing For complete measurements see: F17 - Dimensions, type KFHC
KFHC 30	KFHC 030 01	30	8	30	116	120	Inquiry	CAD
KFHC 30	KFHC 030 02	30	15	50	116	120	Inquiry	CAD

SITEMA Locking Units
type KFHC

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F17 - Dimensions, type KFHC

Type

Ident.-No

Rod Ø mm

Holding capacity kN

Release press bar

Casing Ø mm

Casing Length mm

KFHC 30

KFHC 030 01

116

120

Inquiry

CAD

KFHC 30

KFHC 030 02

116

120

Inquiry

CAD

KFHL, certified by Lloyd's Register

SITEMA - Locking Units type KFHL have been developed to satisfy the particular requirements associated with maritime applications. For example, the complete clamping system has been thoroughly adapted, both in terms of the materials used and the special housing designed to provide protection against any hazards associated with incoming sea water. Other measures include the use of special materials for the housing and seals, as well as the use of special coatings.
The admissible load in kN denotes the actual maximum load that can be applied to a SITEMA - Locking Unit KFHL. The actual holding force is twice as high and equates to the margin required by Lloyd's Register EMEA for the purposes of personal safety.

SITEMA Locking Units type KFHL, certifié par Lloyd's Register Clamping via disc springs, hydraulic releasing For complete measurements see: F52 - Dimensions type KFHL (certified by Lloyd's Register)
Type	Ident.-No	Rod Ø mm	Admiss. load kN	Release press bar	Casing Ø mm	Casing Length mm
KFHL 18	KFHL 018 50	18	5	70	83	130	Inquiry	CAD
KFHL 25	KFHL 025 50	25	10	100	109	148	Inquiry	CAD
KFHL 28	KFHL 028 50	28	17	100	129	188	Inquiry	CAD
KFHL 32	KFHL 032 50	32	17	100	129	188	Inquiry	CAD
KFHL 36	KFHL 036 50	36	25	100	158	212	Inquiry	CAD
KFHL 40	KFHL 040 50	40	25	100	158	212	Inquiry	CAD
KFHL 45	KFHL 045 50	45	37	100	175	256	Inquiry	CAD
KFHL 50	KFHL 050 50	50	37	100	175	256	Inquiry	CAD
KFHL 56	KFHL 056 50	56	50	100	200	287	Inquiry	CAD
KFHL 60	KFHL 060 50	60	50	100	200	287	Inquiry	CAD
KFHL 70	KFHL 070 50	70	75	100	225	315	Inquiry	CAD
KFHL 80	KFHL 080 50	80	75	100	225	315	Inquiry	CAD
KFHL 90	KFHL 090 50	90	125	130	260	416	Inquiry	CAD
KFHL 100	KFHL 100 50	100	125	130	260	416	Inquiry	CAD
KFHL 125	KFHL 125 50	125	165	100	350	422	Inquiry	CAD

KFHW, special version for machine tools

SITEMA - KFHW locking units are also suitable for operation in the presence of coolant/lubricant. For this reason, all the external parts and sealing surfaces are made of stainless steel
Should heavy soiling conditions (grinding dust, swarf, chips, other liquids, etc.) or extreme temperatures exist, please contact our technical department.

SITEMA Locking Units KFHW, Special version for machine tools Clamping via disc springs, hydraulic releasing For complete measurements see: F16 - Dimensions, type KFHW
Type	Ident.-No	Rod Ø mm	Holding capacity kN	Release press bar	Casing Ø mm	Casing Length mm
KFHW 18	KFHW 018 01	18	5	40	75	122	Inquiry	CAD
KFHW 25	KFHW 025 01	25	12	50	96	140	Inquiry	CAD
KFHW 32	KFHW 032 01	32	20	50	115	173	Inquiry	CAD
KFHW 40	KFHW 040 10	40	35	50	140	200	Inquiry	CAD

KFH/X, square casing (hydraulic)

for standard cylinders DIN 24554 (160 bar)

Cylinder with smallest rod diameters
Cylinder with bigger rod diameters
Extended tie-rods without nuts
Customer-supplied coupling flange
Vacant fastening threads at the front face

SITEMA Locking Units type KFH/X Clamping via disc springs, hydraulic releasing For complete measurements see: F13 - Dimensions, type KFH/X
Type	Ident.-No	Rod Ø mm	Holding capacity kN	Release press bar	Casing Height mm	Casing Length mm
KFH/X 18	KX 018 11	18	5	40	63	152	Inquiry	CAD
KFH/X 22	KX 022 11	22	9	40	76	196	Inquiry	CAD
KFH/X 28	KX 028 11	28	12	50	90	200	Inquiry	CAD
KFH/X 36	KX 036 11	36	22	50	115	230	Inquiry	CAD
KFH/X 45	KX 045 11	45	20	40	127	264	Inquiry	CAD
KFH/X 56	KX 056 11	56	35	40	165	300	Inquiry	CAD
KFH/X 18	KX 018 10	18	10	70	63	152	Inquiry	CAD
KFH/X 22	KX 022 10	22	15	70	76	196	Inquiry	CAD
KFH/X 28	KX 028 10	28	20	90	90	200	Inquiry	CAD
KFH/X 36	KX 036 10	36	35	80	115	230	Inquiry	CAD
KFH/X 45	KX 045 10	45	45	100	127	264	Inquiry	CAD
KFH/X 56	KX 056 10	56	80	100	165	300	Inquiry	CAD

KFH/Z, tie-rod casing (hydraulic)

for ISO 6020/2 standard cylinders
variable concerning rod diameter
5 mounting styles available: TB, JJ, C, D, DB
F19 - Dimensions, type KFH/Z

Customer-made coupling flange
Milles pockets are provided to clear tied-rod nuts

CAD

KFPC, special version (pneumatic)

SITEMA Locking Units type KFPC Clamping via disc springs, hydraulic releasing For complete measurements see: F21 - Dimensions, type KFPC (pneumatic)
KFPC 30	KFPC 030 01	30	12	4	138	195	Inquiry	CAD

SITEMA Locking Units
type KFPC

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F21 - Dimensions, type KFPC (pneumatic)

Type

Ident.-No

Rod Ø mm

Holding capacity kN

Release press bar

Casing Ø mm

Casing Length mm

KFPC 30

KFPC 030 01

138

195

Inquiry

CAD

KFP/Z, tie-rod casing (pneumatic)

for standard cylinders ISO 6431/VDMA
F20 - Dimensions, type KFP (pneumatic)

CAD

Hydraulic clamping and releasing

The type KB is especially suited to meet extreme specifications. A wide range of special versions have been built with shaft diameters from 25 to 360 mm and holding capacities extending to more than 5000 kN.

Type KB, (hydraulic)

SITEMA Locking Units type KB Hydraulic clamping and releasing For complete measurements see: F15 - Dimensions, type KB
Type	Ident.-No	Rod Ø mm	Holding capacity kN	Release press bar	Casing Ø mm	Casing Length mm
KB 40	KB 040 05	40	80	160	138	196	Inquiry	CAD
KB 56	KB 056 03	56	140	160	170	230	Inquiry	CAD
KB 80	KB 080 06	80	280	160	226	270	Inquiry	CAD
KB 100	SK 100 059	100	330	130	280	322	Inquiry	CAD
KB 110	SK 110 032	110	450	130	300	344	Inquiry	CAD
KB 125	SK 125 034	125	450	130	300	344	Inquiry	CAD
KB 140	SK 140 030	140	600	130	335	392	Inquiry	CAD
KB 160	SK 160 021	160	800	130	375	402	Inquiry	CAD
KB 180	SK 180 013	180	950	130	405	434	Inquiry	CAD
KB 200	SK 200 013	200	1100	130	425	444	Inquiry	CAD
KB 200	SK 200 018	200	1500	140	455	544	Inquiry	CAD

Type KBP (pneumatic)

pneumatic version (type KBP) on request

Accessories

Auto-Bleeder

Air in hydraulic systems can cause various problems. Especially the dieseling-effect (compression-ignition of air-oil mixture) can cause damages to seals and sealing surfaces. Clamping devices are exceptionally in danger to this effect, due to their small hydraulic volume. Especially if the Clamping Device is situated on the very top of the hydraulic system a single manual bleeding is not always sufficient. At least in these cases an Auto-Bleeder is strongly recommended.